Cummins Engine Oil Seal Kit For 4BT 6BT 6CT 3933262 5259499 3934486 3970548 3357693 4089342

If you order by “4BT” alone, you will eventually receive a part that does not fit. The 4BT family was produced for more than two decades in several versions, and although the engine is visually similar across them, the parts are not always interchangeable.

The variants you will meet

  • 4BT — the early 3.9 litre turbo-diesel, produced from the mid-1990s, widely used in light commercial vehicles, minibuses, small generator sets and agricultural machinery.
  • 4BT3.9 / 4B3.9 — the updated 3.9 litre version with revised emissions and injection equipment, used extensively in Chinese-built light trucks and pickups.
  • 4BTA3.9 — the turbocharged, higher output version of the 3.9 litre engine, common in export trucks and larger generatorsets.

How to tell them apart

  1. Read the rating plate. The model code, the rated power, the emission standard and the engine number are on the data plate, usually on the rocker cover or the timing case. This is the fastest and most reliable method.
  2. Look at the turbocharger position and the injector arrangement. The earlier engine and the later variants differ in the position of the turbo and in the fuel system layout.
  3. Note the output. A 4BT in a light van and a 4BTA3.9 in an export truck may share a badge but not a turbocharger, an injection pump or a head.

Which parts actually differ

Part group Notes
Turbocharger Differs between the early 4BT and the 4BTA3.9. Do not interchange on the basis of the engine family name.
Cylinder head and head gasket Check the part number on the head. A visually similar head can carry a different gasket set.
Injection pump and injectors Depends on the emission standard and the production year.
Water pump Several variants exist for the 3.9 litre, with different impeller and housing arrangements.
Pistons and rings Bore and compression differences across the family — match by the piston number and CPL.
Filters, belts, gaskets, sensors Frequently shared, but confirm before fitting.

Why this matters on export trucks

A large share of the 3.9 litre Cummins engines in Africa, the Middle East and Central Asia are fitted to trucks that were assembled for export, with Chinese-built engines from DCEC or BFCEC alongside genuine Cummins units. On a truck of that type the badge on the valve cover may not match the engine badge on the data plate, and the parts can come from different production standards. The plate is the document that settles it.

How to order with confidence

Send us the engine model from the plate, the eleven digit serial number, and a photo of the part you need or the old one you are replacing. We will confirm the cross-reference and tell you whether the part is in stock, what it costs and how long it takes. See how to cross-reference Cummins part numbers and how to read the engine serial number.

Parts for this platform are listed under Cummins 4BT engine parts, and the wider comparison is in which Cummins engine you have.